In short
- The authority sets the limits: setbacks, ground coverage, floor area ratio, and height. Plot size and road width feed into them.
- Permission and structural capacity are separate. A foundation must be designed for every floor you plan to build.
- Decide the final number of floors before design starts, even if you will build in phases.
- Do not rely on a neighbour's building as the answer. Rules and plot conditions differ.
In this article
The short answer
The number of floors you can build is the smaller of two limits. The first is what the authority permits. The second is what the structure, the soil, and the budget can carry. Many owners ask about the first and forget the second.
Floors are usually written as G+4, G+8, and so on, meaning the ground floor plus that number of upper floors. Several of our projects are described this way, from G+3 to B+G+15.
What the structure controls
Even where the rules allow more floors, the building has to be designed to stand. Three things set the structural limit:
- The soil. Soft or loose ground may need piles or a mat foundation, and that changes the cost of each added floor. See the soil report.
- The structural system. Taller buildings need more lateral resistance, often shear walls as well as a frame. See Steel or RCC?.
- The earthquake and wind loads that the building code requires for the site. See earthquake-safe design.
If you plan to add floors later
Many owners build three or four floors now and plan to add more later. That works only if the foundation, columns, and stairs were designed for the final height from the start. Adding floors to a building that was not designed for them needs a full assessment first. Read what has to be checked.
Do not use a neighbouring building as proof of what is allowed on your plot. It may have been built under older rules, with different plot conditions, or without proper permission.
How to find your number
- 01
Measure the plot and the road
A digital land survey gives the true plot area and the road width.
- 02
Ask the authority for the limits
Setbacks, coverage, FAR and height for the plot, in writing or through an architect.
- 03
Test the soil
So that the structural engineer can say what foundation each number of floors needs.
- 04
Set the budget
A cost estimate for the number of floors you are considering shows what each additional floor costs.
Common questions
How many floors can I build on 5 katha in Dhaka?
There is no fixed number. It depends on the plot's shape, the road width, the setbacks, and the authority's coverage and height rules, as well as the soil and the structure. An architect can check these for your plot.
What does G+4 mean?
G+4 means a ground floor plus four upper floors, so five levels in total. A basement is written with a B, as in B+G+15.
Can I build more floors than the approved plan?
No. Building beyond the approved plan is a violation, and the authority can order the extra work stopped or removed. If you want more floors, apply for a revised approval before building.
Does the structure limit the number of floors?
Yes. The soil, the structural system, and the loads the code requires all limit what can safely be built. Permission to build more does not make the structure safe for more.
This article is general guidance, not advice for a particular building. Ground conditions, rules, and existing structures differ from site to site, so ask an engineer to check yours before making decisions.
Want this checked for your site?
Engr. Abu Hasnat Asib Neloy, Structural Engineer, Co-Founder, can review your plot, building, or documents and tell you what is needed next.
