In short
- A katha is commonly taken as 720 sq ft in Dhaka and Gazipur, but the area stated in the deed is what counts legally.
- A decimal is one hundredth of an acre, which is 435.6 sq ft. One katha is about 1.65 decimals.
- Bigha and katha values vary between regions, so do not convert them from a table. Use the deed and a survey.
- Always compare the deed area with a measured area before you design or pay for the plot.
In this article
The units you will meet
Land in Bangladesh is described in several units, and you will meet more than one on the same plot. The common ones are below.
- Katha (কাঠা)
- Commonly 720 sq ft for plots in Dhaka and Gazipur. It is a local unit, so confirm what the seller or the deed means by it.
- Decimal (শতাংশ)
- One hundredth of an acre. One acre is 43,560 sq ft, so one decimal is 435.6 sq ft. Deeds and khatians usually use decimals.
- Acre (একর)
- 100 decimals, or 43,560 sq ft.
- Bigha (বিঘা)
- Its size differs between regions, and between katha-per-bigha conventions. Do not convert bigha without checking the local value.
Quick conversions
Using 1 katha = 720 sq ft and 1 decimal = 435.6 sq ft, the common plot sizes work out as follows.
- 1 katha: 720 sq ft, about 66.9 square metres, about 1.65 decimals.
- 3 katha: 2,160 sq ft, about 200.7 square metres, about 4.96 decimals.
- 5 katha: 3,600 sq ft, about 334 square metres, about 8.26 decimals.
- 10 katha: 7,200 sq ft, about 669 square metres, about 16.5 decimals.
- 1 decimal: 435.6 sq ft, about 40.5 square metres, about 0.6 katha.
A plot of 10 katha is not 10 katha of floor space. The floor area you can build depends on the rules of the approving authority, not on the plot area alone. See how many floors you can build.
Why the deed area and the real area differ
The deed gives the area that was recorded when the land was last measured. The ground may differ for ordinary reasons:
- Older measurements were made with chains and ropes, and rounding added up over several transfers.
- A boundary may have moved: a neighbour may have built over the line, a road may have been widened, or a drain taken a strip.
- A plot may have been divided, and the parts may not add up to the whole.
- Different documents may use different units, and one may have been converted wrongly.
A difference of a few percent is common. A large one needs to be understood before you buy or build, because the approval will be based on the area on the survey drawing and the deed together.
How to find out the real area
A digital land survey measures the plot boundaries with a total station and produces a CAD drawing with the area, the road width, and the levels. Compare three numbers: the area in the deed, the area in the khatian, and the measured area. If they agree, you can design with confidence. If they do not, find out why before design starts.
Always check whether a seller's 'katha' means 720 sq ft. In practice some local conventions differ, so write the area in square feet and decimals in the agreement, and have the plot measured.
Common questions
How many square feet is one katha in Bangladesh?
In Dhaka and Gazipur, one katha is commonly taken as 720 sq ft, about 66.9 square metres. Because it is a local unit, confirm what the seller means and check the area stated in the deed.
How many decimals are in one katha?
Roughly 1.65 decimals, since one decimal is 435.6 sq ft and one katha is commonly 720 sq ft.
Is the area in my deed always correct?
It is the recorded area, but it may differ from the area on the ground. A survey measures the plot as it is and shows any difference.
Can I build on the whole plot area?
No. Setbacks, ground coverage, and other rules of the approving authority limit what can be built. The permitted floor area is set by those rules, not by the plot area alone.
This article is general guidance, not advice for a particular building. Ground conditions, rules, and existing structures differ from site to site, so ask an engineer to check yours before making decisions.
Want this checked for your site?
Engr. Abu Hasnat Asib Neloy, Structural Engineer, Co-Founder, can review your plot, building, or documents and tell you what is needed next.
